Technics 1210 Pair


Hire £40

Technics SL series turntables have become legendary with over 3 million sets being produced and used by DJs and clubs over the world. SL-1210MK2 features the indisputably accurate, reliable and durable Quartz Direct Drive Motor, with Aluminium Diecast cabinets and heavy rubber base for vibration damping.

Long recognized by the world’s DJs as the best club-use turntable, the famous SL-1210 series is without a rival.

Features

  • Precision moulded aluminium diecast cabinet and heavy rubber base material absorb unwanted vibrations
  • Total quartz locked continuous pitch adjustment up to 8%
  • Unwavering quartz DD accuracy
  • Highly sensitive low-mass tonearm with gimbal suspension/Helicoid tonearm height adjustment.
  • Very high torque (1.5kg (cm)) for quick start-ups
  • Headshell included - cartridge & stylus NOT included
Technical Specifications
    General

  • Power supply: ~ 110-120V / 22O-240V, 50 or 60 Hz Consumption: 16 W
  • Dimensions: (W x H x D) 45.3 x 16.2 x 36 cm
  • Weight: 12.5 kg (27.6 lb)

    Turntable section

  • Type: Quartz direct drive - Manual turntable
  • Drive method + Motor: Direct drive + Brushless DC motor
  • Turntable platter: Aluminum diecast
  • Diameter 33.2 cm (13-5/64 inch )
  • Weight 2 kg (4.4 lb.)
  • Turntable speeds: 33-1/3 rpm and 45 rpm
  • Starting torque: 1.5 kg-cm (1.3 lb-in)
  • Build-up characteristics: 0.7s from standstill to 33-1/3 rpm
  • Braking system: Electronic brake
  • Speed change due to load torque: 0% within 1.0 kg-cm (0.87 lb in)
  • Wow and flutter: 0.01% WRMS 0.025% WRMS (JIS C5521) +/- 0.035% peak (IEC 98A Weighted) This rating refers to turntable assembly alone, excluding effects of record, cartridge or tonearm, but including platter. Measured by obtaining signal from built-in frequency generator of motor assembly.
  • Rumble: -56 dB (IEC 98A Unweighted) -78 dB (IEC 98A Weighted)

    Tonearm section

  • Type: Universal - Effective length: 230mm (9-1/16 inch )
  • Arm height adjustment range: 31.8 - 37.8 mm (helicoid part 6 mm) (1-21/32 inch - 3-35/64 inch ) (helicoid part 15/64 inch )
  • Overhang: 15mm (19/32 inch )
  • Effective mass: 12 g (without cartridge)
  • Offset angle: 22 degrees
  • Friction: Less than 7 mg (lateral, vertical)
  • Tracking error angle: Within 2o32 (at the outer groove of 30 cm (12 inch ) record) Within 0o32 (at the inner groove of 30 cm (12 inch ) record)
  • Stylus pressure adjustment range: 0 - 2.5 g
  • Applicable cartridge weight range: 6 - 10g, 13.5 - 17.5 g (including headshell) (with auxiliary weight): 9.5 - 13g, 17 - 20.5 g (including headshell) (with shell weight) 3.5 - 6.5g, 11 - 14g (including headshell)
  • Headshell weight: 7.5g